Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Where can I get ICD2 for less than $160?

Status
Not open for further replies.

proect_pic

Newbie level 4
Joined
Jan 31, 2006
Messages
6
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,334
hi every one..
i am doing a project in PIC18f8490.
to download the program i need ICD2.....
but its very costly....around $160....
where can i get it for less cost.....i am in india.....
 

Re: ICD2

You can buy a one from http://www.olimex.com/dev/index.html for about $90.
Check out **broken link removed** they sell a kit for about $70.

If you don't mind building your own do a quick search on edaboard or google for ICD2 or ICD2 clone.

You could also buy a low cost programmer such as EPIC Plus for about $60. http://www.rentron.com/PicBasic/products/EPIC.htm
$99 with extra accessories:
**broken link removed**
 

Re: ICD2

what does actually an ICD2 built with?
there are some controllers for which ICD2 is required.
will one ICD2 work for all the controller or will they a have separate ICD2 for individual PIC controller.

Thanx
AKhilesh Chidare
 

Re: ICD2

Hai

In INDIA ,a bangalore firm makes what they call e-chip ICD.

**broken link removed**

first see weather what you look for is ICD or a simple programmer?

picstudent
 

Re: ICD2

akhileshchidare,

IDC2 from olimex if shipped to you fully assembled and tested.
MCUServer ships preprogrammed MCU too.

You can always build a simple parallel port programmer to program 16F877, or have someone else program it for you.
 

Re: ICD2

what about this one , ICD2 Still cheaper..will this work?

**broken link removed**
 

    proect_pic

    Points: 2
    Helpful Answer Positive Rating
Re: ICD2

thanx for ur support....

if we buy low cost ICD from other dealers other than Microhip will they work ?
the link akhileshchidare has sent seems to be the cheaper ICD2.. but will it work?
i am going to buy the development boaed from the MIcrochip dealer for that will the above ICD2 works?
 

ICD2

Have more ICD2 from ebay **broken link removed**
 

Re: ICD2

akhileshchidare said:
what about this one , ICD2 Still cheaper..will this work?

**broken link removed**

It work, good and low cost.
 
Last edited by a moderator:

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top