Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

What's the difference between KVL AND KCL?

Status
Not open for further replies.

joe1986

Full Member level 4
Joined
Jan 25, 2008
Messages
204
Helped
24
Reputation
48
Reaction score
11
Trophy points
1,298
Activity points
2,922
wht is the difference between KIRCHOFFS'S VOLTAGE LAW and kirchoff's current law??
 

difference between kcl and kvl laws

KVL means the sum of voltage across any closed loop is zero
KCL means the sum of current into one node is zero
 

    joe1986

    Points: 2
    Helpful Answer Positive Rating
KVL AND KCL???

KVL:
The sum of all the voltages in a closed loop is zero

KCL:
The sum of the currents leaving a node=the sum of the currents entering the node

i.e:

N1 N2 N3
o---/\/\/\/\/\/\--o---/\/\/\/\/\/\--o
I1 ---> I2 --->


here I1=I2

Sorry, the draw moves when i post it, but this is the idea
 

    joe1986

    Points: 2
    Helpful Answer Positive Rating
Re: KVL AND KCL???

KVL states that the sum of the elements voltage in a closed loop is zero but
KCL says that for a closed surface the algebraic sum of the currents are zero.
 

    joe1986

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top