Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

what the advantage of AT89S52 over AT89C52??

Status
Not open for further replies.

wolfheart_2001

Member level 5
Joined
Mar 17, 2005
Messages
91
Helped
9
Reputation
18
Reaction score
0
Trophy points
1,286
Activity points
2,368
at89c52 at89s52

i dont know that main advantage of AT89S52 over AT89C52??

can anybody tell me?
 

at89c52 vs at89s52

AT89C52 is older design than AT89S52 and basically there is no advantages of one over the other. If you look into Atmel's device list there is no AT89C52 at all ( http://www.atmel.com/dyn/products/devices.asp?family_id=604 ).
There are small diferenies between them, however, and one of them is maximum frequency operation: 24MHz for C version and 33MHz for S version..
Regards,
IanP
 

at89s52 vs at89c52

I have used both before... both are the same ( meaning you can plug an S52 to an C52 ), but if i am not wrong S52 are the never version and has the additional benefits of -

1. SPI
2. In-circuit programming, through SPI
3. Internal watchdog

There could be more. Read up on the datasheet. Good day.

chicken_feet
 
application and advantages of at89c52

In-circuit programming, through SPI. I like this feature.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top