Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

what kind of boundary should i set ?

Status
Not open for further replies.

popzhou

Newbie level 6
Joined
Aug 4, 2005
Messages
13
Helped
1
Reputation
2
Reaction score
0
Trophy points
1,281
Activity points
1,396
i use hfssv9 to simulate the structure like the attachment describes, i use an air box and add radiation boundary and want to get the s12 curve , but the simulate result doesn't match the results in my reference paper, anybody help me???
 

I did make some changes but still having a very poor response.
Try in you side to see if you can get the results you expected.
Would you post the paper or send it to me so I can have the
reference?.
 

jallen , if you try to set the substrate four sides as PerfectH, and clear the airbox, then is the result. i have solved the problem, but always thanks a lot!
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top