Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

What is this component?

Status
Not open for further replies.

VTI_16V

Member level 1
Joined
Nov 25, 2019
Messages
38
Helped
0
Reputation
0
Reaction score
0
Trophy points
6
Activity points
386
Hello everybody. Does anybody know what is this red component with black stripe on one end? I found that some of theese are faulty. They are giving me reading all around from 10-60 k ohms, but only in one diretion. In diode mode - nothing. I know that they are problem because i changed them with another ones from identical board, and now everything works... Thanks in advance
 

Attachments

  • IMG_20201215_224315.jpg
    IMG_20201215_224315.jpg
    1.5 MB · Views: 116
  • IMG_20201215_224324.jpg
    IMG_20201215_224324.jpg
    1.8 MB · Views: 133

Glass capacitors or possible gas tube transient protectors.

1608074975535.png


1608075083948.png



Regards, Dana.
 

Omg theese are really diodes. But this whole board is covered by coating... And it looks like how much i tried that i couldn't make a good contact with leads when I was measuring in diode mode. When I took them off and scraped really good I can get a voltage drop of a diode in one direction... Probabbly some kind of fast switching diodes, becase they are getting a square wawe signal from that capacitor next to it which is generated by 555. LL4148 probabbly like Barry said
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top