Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

What is the wavelength in Mesh Properties in CST?

Status
Not open for further replies.

svarun

Full Member level 5
Joined
Mar 31, 2002
Messages
271
Helped
22
Reputation
44
Reaction score
15
Trophy points
1,298
Location
In the warm company of God's most exquisite creati
Activity points
2,746
CST - Meshing doubt

Hi all,
I have a basic doubt. In CST MWS - 5 , when meshing a structure , we specify the meshing density as lines per wavelength in the "Mesh Properties" dialog box. Here what does wavelength mean ? Is it free space wavelength of the highest frequency of simulation or is it the wavelength in the material with highest dielectric constant ? Thanks for your help.

-svarun
 

Re: CST - Meshing doubt

Hi

MWS takes the dielectric into account. 10 lines per wavelength means minimum of ten lines at the shortest wavelength inside a dielectric

F.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top