Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

What is the radius of probe normally used in the ie3d for coaxial and L-probe?

Status
Not open for further replies.

lovhana

Junior Member level 2
Joined
Apr 5, 2007
Messages
20
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,391
hello to all,anybody knows what is the radius of probe normally used in the ie3d for coaxial and L-probe..pls tell me..thanx
 

Re: help ie3d simulation

Hi, Lovhana:

You should use the one in your actual design. Try to match the radius in IE3D modeling to the one in reality for the best results. Regards.
 

Re: help ie3d simulation

thanx very much.. i'll try and see the result..i will come to you if i have a problem later..
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top