Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

What is the meaning of gain 7V/V in OPA 855

Status
Not open for further replies.

engr_joni_ee

Advanced Member level 3
Joined
Nov 3, 2018
Messages
742
Helped
2
Reputation
4
Reaction score
4
Trophy points
18
Activity points
6,171
Hi,

The gain of the Operational Amplifier in inverting configuration is Vout / Vin = - Rf / Ri.

Usually the voltage gain is represented in dB after taking Log. I am looking at the datasheet of OPA 855 which has gain 7 V/V. Does it mean that the gain of this Operational Amplifier is 7 ?

8 GHz gain-bandwidth means that this Operational Amplifier has unity gain up to 8 GHz, right ?
 

1) You need to read ALL the words.
2) It says 7V/V STABLE. That means it’s not stable with lower gains.
2) GBW PRODUCT specifies the maximum allowable gain at a particular frequency (or maximum frequency for a particular gain]. It does not necessarily mean you can have a gain of 1 at 8GHz. See (2).
 

Reading the very first datasheet lines answers your question.

The special meaning of gain = 7 is minimal stable gain. OPA855 is a decompensated, not unity stable OP. Respectively unity gain of 8MHz isn't feasible. Many curves and waveforms are illustrating the parts behaviour.
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top