Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

what is the best switch

Status
Not open for further replies.
D

danda821

Full Member level 2
Joined
Jun 18, 2002
Messages
139
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,296
Activity points
1,083
I need to use switches to set 8 bits digital signal (0 or 1). what is the best switch I can use on PCB? Jumper is an option, but it uses too much space. thanks.
 

"Best" in what way?

How about a common DIP switch? Lots of companies make them. Here's one:
**broken link removed**
 

"Best" means compact board area. If I use DIP switch, I will need some pull-up resistors (100KOhms for 1.2V power supplier). I do not know if it is ok. If I use two position slide switch, the pull-up resistors are not needed and high/low can be setted easily. Thanks.

echo47 said:
"Best" in what way?

How about a common DIP switch? Lots of companies make them. Here's one:
**broken link removed**
Click to expand...
 

Hi here i have got a site which shows different switches i think SPDT slide switch will solve your purpose.
ramesh



**broken link removed**
 

Best switch means, do you want transistor or FET wants to be in switch mode?
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top