Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

[SOLVED] what is the antenna connected to this module

Status
Not open for further replies.

flashking

Full Member level 3
Joined
Apr 12, 2009
Messages
158
Helped
28
Reputation
56
Reaction score
28
Trophy points
1,308
Activity points
2,147
Hello

This a picture of SkyLab SKM53 Module

2s8r0jm.jpg


What is te antenna connected to it ?

where can I buy it alone ?

thanks
 

It looks like a patch antenna. To reduce its size, some makers use a dielectric substrate with certain permittivity.
 
This is no doubt a GPS ceramic antenna with dielectric constant of around 22.0 and thickness of about 5mm. We usually use a 28dB 3-stage LNA to enhance the gain to about 30dBi (28dB LNA + 3dBi Antenna gain) which communicates to the satellite.
you may contact www.lambdoid.net for more details
 
Thanks for all of you

I conclude that it is a ceramic patch

also I don't think it is active, I think it is a passive antenna (without LNA)

Thanks
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top