Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

What is maximum permissible current in Lead acid battery?

Status
Not open for further replies.
These batteries are deep cycle type, and have capacity rating declared in C/20, that means capacity is declared if you discharge battery for minimum or over 20h.

If you try to discharge batteries with very small resistance and with higher amperage over 300A, batteries lead plates can distort.

Starter lead acid type can give you more starting amperage but they are NOT for deep cycling up to 10,5V.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top