Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

[SOLVED] what is forward current If and tp

Status
Not open for further replies.
4

4tuty

Member level 3
Joined
Mar 27, 2012
Messages
56
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
1,723
**broken link removed**


what is If and tp
 

Diode (foward) current, pulse width.

If your IR LED application is DC rather than pulsed, you only look for maximum continuous forward current and ignore the pulse stuff.
 

FvM said:
Diode (foward) current, pulse width.

If your IR LED application is DC rather than pulsed, you only look for maximum continuous forward current and ignore the pulse stuff.
Click to expand...

could you please explain about the pulse stuff
 

The datasheet tells you that "If" is its forward current.
It also shows that its maximum allowed continuous current is 150mA but if the tp pulse width is 100us for half the total time then it can withstand 300mA of current because it takes longer time to overheat.
 
  • Like
Reactions: 4tuty

    4

    4tuty

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top