Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

What is Boiling Test in the IC Fabrication??

Status
Not open for further replies.
A

acey80

Newbie level 6
Joined
Jun 9, 2004
Messages
12
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
129
What is the Boiling Test for? and How is it conducted?? I tried to find it in the Internet but NONE! Thanks!
 

Any more details ?

Typical IC qualification tests include:
Hot Ambient Stress Testing : just temperature and voltage stress tests.
High temp operational Life : same as above but with IC constantly exercised over 1000 hours.
Autoclave : Hot humid testing for packaging.
Thermal cycling : -40 deg C to 125 deg C ramp up down to test packaging
 

:?: It's about the IC Test after fabrication.... Anyway, thanks!!
 

Not sure about this boiling test, but I suspect maybe you mix it with "burn in" test.
 

Do you means oil dipping with 200c, then perform
test?
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top