Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

What in the hell does "Lambda refining mesh; process me

Status
Not open for further replies.

djkross

Junior Member level 2
Joined
Oct 11, 2007
Messages
21
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,411
lambda refining mesh,process mesh3d

Lambda refining mesh; process mesh3d: unexpected internal software error code 1054 with module id 0.

what does that mean?
 

lambda refining mesh

probably due to the drawing of your model, i hv encountered the same problem before. Try to redraw your model or change the mesh size
 

    V

    Points: 2
    Helpful Answer Positive Rating
lambda refining mesh.process mesh3d

djkross said:
Lambda refining mesh; process mesh3d: unexpected internal software error code 1054 with module id 0.

what does that mean?

yor frequensy may be extra-high, or dimension too large..
 

you mean HFSS ha?
It may also arise because of a non-smooth transition. make your contacts as smooth as possible. for example when a sphere and a large cube intersect
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top