Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

What are the functions of a carrier?

Status
Not open for further replies.

userdce

Member level 2
Joined
May 31, 2005
Messages
45
Helped
2
Reputation
4
Reaction score
0
Trophy points
1,286
Activity points
1,613
as described by savendu

carrier is used so that antenna size can be reduced
power can be transmitted to greater distances

as carrier does not carry any information it just helps to let the signal to be carried
 

Re: carrier

Carriers exist in some forms of amplitude modulation. They have no affect on antenna size.

What made classical AM used in the MW broadcast band was the cost reduction in the receivers.
 

radio modulation methods, carrier versus no carrier

>carrier is used so that antenna size can be reduced
No. Modulation methods that use carriers such as AM or FM do not require smaller antennas than modulation systems such as SSB when used at the same frequency.

>power can be transmitted to greater distances
No, the energy from a transmitter at a paticular frequency is attenuated the same amount with distance. The signal to noise ratio required at the receiver to give a usable signal does vary between modulation modes.

AM and FM recievers can be made more cheaply than recivers for other modes.
 

Re: carrier

otherthan reduced antenna height and high distance coverage, also we can perform frequency division multiplexing since we are using different carrier frequency
 

Re: carrier

yes, carrier carry no any signal,

it's a truck only.

best regards



userdce said:
as described by savendu

carrier is used so that antenna size can be reduced
power can be transmitted to greater distances

as carrier does not carry any information it just helps to let the signal to be carried
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top