Dec 13, 2002 #1 L leemarrow Full Member level 3 Joined May 3, 2001 Messages 174 Helped 11 Reputation 22 Reaction score 9 Trophy points 1,298 Activity points 985 build an pcb ligh box hi, i have found a good light box for pcb costruction look this http://www.geocities.com/mrardj/elettronica.html it's italian language
build an pcb ligh box hi, i have found a good light box for pcb costruction look this http://www.geocities.com/mrardj/elettronica.html it's italian language
Dec 26, 2002 #2 sokrat Full Member level 5 Joined Sep 23, 2002 Messages 277 Helped 9 Reputation 18 Reaction score 7 Trophy points 1,298 Location EGYPT Activity points 2,116 thanks thanks but i want english language :lol: if you can translate it will be good work yours S 8O KRAT
thanks thanks but i want english language :lol: if you can translate it will be good work yours S 8O KRAT
Dec 27, 2002 #3 S sick_man Guest lightbox a nice way to get cheep uv tubes i used some uv tubes from the things used to check currency 6 each side then i could do double sided pcb.s **broken link removed** i found code here this gave me the pwm to drive all the bulbs using my own circuit to wire them all up to one supply {in series 6 then parallel two} it takes 3.36 sec exposure to get a working board from transparancies the currency checkers were about 1 euro each
lightbox a nice way to get cheep uv tubes i used some uv tubes from the things used to check currency 6 each side then i could do double sided pcb.s **broken link removed** i found code here this gave me the pwm to drive all the bulbs using my own circuit to wire them all up to one supply {in series 6 then parallel two} it takes 3.36 sec exposure to get a working board from transparancies the currency checkers were about 1 euro each
Dec 28, 2002 #4 L leemarrow Full Member level 3 Joined May 3, 2001 Messages 174 Helped 11 Reputation 22 Reaction score 9 Trophy points 1,298 Activity points 985 Ok, i have ask to translate the box ligth page. Bye