odyseus
Advanced Member level 4
- Joined
- Dec 31, 1999
- Messages
- 115
- Helped
- 6
- Reputation
- 12
- Reaction score
- 4
- Trophy points
- 1,298
- Location
- Cold & Wet Europe!
- Activity points
- 1,216
Hi All,
I have an HFSS simulation for a Ka-Band waveguide to microstrip transition, that I need to scale for Ku-band. The design uses a stepped ridge to transform the 50 ohm microstrip up to the 300ohm freespace.
Can anyone point me to any notes/papers/articles etc that will tell me what parts of the design are frequency depenadent, so that I can frequency scale them.
I've had a search on this forum and google and can't find anything that gives me practical design data.
All the best
Ody
I have an HFSS simulation for a Ka-Band waveguide to microstrip transition, that I need to scale for Ku-band. The design uses a stepped ridge to transform the 50 ohm microstrip up to the 300ohm freespace.
Can anyone point me to any notes/papers/articles etc that will tell me what parts of the design are frequency depenadent, so that I can frequency scale them.
I've had a search on this forum and google and can't find anything that gives me practical design data.
All the best
Ody