Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Watertight N-type coaxial connector

Status
Not open for further replies.
E

etmabreu

Full Member level 3
Joined
Mar 13, 2009
Messages
170
Helped
51
Reputation
102
Reaction score
49
Trophy points
1,308
Activity points
2,238
Good morning,


I am looking for a flanged N-type coaxial connector. The connector will attached with four screws to a metal panel which is also THE ground plane.

The idea is to use this connector in an outdoor antenna, so it must be watertight.

I could not find yet any N-type connector that is watertight (the only one I got is not RoHS compliant). Is there anything like this available? How to attach the connector to the panel and make this junction watertight?

Any help is really appreciated! :)
 

You could try to find a locking type connector and add your own gasket or o-ring for a water tight seal. Try to find your dimensions and look at McMaster Carr for them.
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top