Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

vpp on epic programmer please help

Status
Not open for further replies.
E

Eddy25

Newbie level 2
Joined
Dec 2, 2008
Messages
2
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,290
Can't get vpp 13,5v with epic programmer. The max i can get by changing the value of the variable resistor is 12,65V. I'm using a 15V- 1A dc adapter. What may be the problem.
Thanks.
 

Eddy25 said:
Can't get vpp 13,5v with epic programmer. The max i can get by changing the value of the variable resistor is 12,65V. I'm using a 15V- 1A dc adapter. What may be the problem.
Thanks.
Click to expand...

With the application of DC, the bridge will drop 1.4V,the balance DC is not sufficient for 7812 with a diode in the common. It needs at least 3V higher than expected output.

You may apply 15V AC from secondary of the adopter direct.
 

Thanks. Have used a 18v dc adapter and everything is OK.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top