Hi,
Thanks for your reply.
Please find the attachment of the circuit I am using for voltage to frequency conversion.
I have set 10 kHz for 0V and 110 kHz for 10V. For the voltage between 1 to 9, I was getting some random frequency like 310 kHz for 2V, etc.
Also, the Behaviour of the practical circuit is not match with the theoretical calculation of Frequency output.
Fout= Vin/ 7.5 R1 C1
where; C1= One-shot capacitor(in my case 50 pF)
R1=Input resistor(in my case 50kΩ potentiometer)
Vin= Input voltage(0 to 10V)