Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Virtual Machine Connection Failure

Status
Not open for further replies.
A

anafor

Newbie level 5
Joined
Jun 9, 2004
Messages
10
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
79
Hi every one ,
I have a questionfor you!!!
I am using TI's Dm 355 evaluation board , I have Installed Red hat on a Virtualmachine (VMware) and I try to connect to board with host computer , I am using RS-232 (Hyperterminal) and Ethernet connection but I couldn't achieve to get host machine's IP ,
My codes are

EVM # setenv nfshost <IP ADRESS OF HOST>
EVM #saveenv
EVM#boot

and hyperterminal says to me "Kernel Panic"!!! :)

:DWhy this kernel paniced?
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top