Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Viewsonic E75F monitor Model : VCDTS23103-1 schematic needed

Status
Not open for further replies.

sawwa7

Full Member level 6
Joined
Oct 30, 2004
Messages
332
Helped
63
Reputation
126
Reaction score
31
Trophy points
1,308
Activity points
2,697
view sonic model vcdts23103

hi all colleagues
i have this monitor which blows the HOT , i need service manual or schematic please .
if any one has this manual please upload
Thanks In advance
Kind Regards
 

viewsonic e75f

hi all colleagues
i have here :
I501 = MCU tatung f7ss-e75f
power control using Q868 5S0965
I401 = TDA9111 sync processor
I330 = TDA8172 vertical out
the HOT is shorted and was changed by another one using : BU4525AX and sounds not the exact replacement for the original HOT .
is that one is correct or what's the correct type of HOT used here?
the CRT also is tatung made which indicates it's a tatung chassis but couldn't find any more identifications .
if u have the service manual or schematic for this monitor please upload
thanks in advance
Kind Regards
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top