Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Video Camera control question.

Status
Not open for further replies.

radio1ne

Newbie level 1
Joined
Aug 22, 2009
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
USA
Activity points
1,289
Assembling 3 video cameras on pan tilt mounting. Pan is not fast enough to track moving person so am planning on using 3 cameras at 60 degree angle mount positions. Need to bwe able to control each camera individually. Assuming rotary switch would be used so I could use each video image separately. Each camera has 12V DC power (pos + ground) and video output. So I need to turn these functions on then off and move to next camera. I don't know what type opf rotary switch to buy (or where) and don't know what wiring diagram woud be. Assume I need three position switch with 4 ?? make or break connections at each position. Thanks for all help..............DJ
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top