VHDL or verilog code for Ethernet

[walker_iit]

VHDL or verilog code for peripheral demonstration

Hello,

I m working on a Altera DE2-70 board, and i need simple vhdl/verilog programs to make use of all the resources in the system.
The available resources are
· 2-Mbyte SSRAM
· Two 32-Mbyte SDRAM
· 8-Mbyte Flash memory
· SD Card socket
· 4 pushbutton switches
· 18 toggle switches
· 18 red user LEDs
· 9 green user LEDs
· 50-MHz oscillator and 28.63-MHz oscillator for clock sources
· 24-bit CD-quality audio CODEC with line-in, line-out, and microphone-in jacks
· VGA DAC (10-bit high-speed triple DACs) with VGA-out connector
· 2 TV Decoder (NTSC/PAL/SECAM) and TV-in connector
· 10/100 Ethernet Controller with a connector
· USB Host/Slave Controller with USB type A and type B connectors
· RS-232 transceiver and 9-pin connector
· PS/2 mouse/keyboard connector
· IrDA transceiver
· 1 SMA connector
· Two 40-pin Expansion Headers with diode protection

Switches, LEDs , RS232 etc are common, and codes are easily designable or available. But since i dont know much about Ethernet Protocol, and how to make use of TV Decoder, PS/2 interface ,SDRAM, SSRAM etc, which still needs to be tested and demonstrated.
Need some help regarding source codes of these modules for demonstration. Some suggestions would be of great help.

Regards
Walker

 

[FvM]

How about the demonstration projects from the DE2-70 system CD? Don't they work for your purposes?