Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

vhdl design and fpga design for robotic arm manipulator

Status
Not open for further replies.

lord of lord

Newbie level 1
Joined
Jun 19, 2011
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,288
hi everyone....
i have designed a vhdl program for robotic arm manipulator and it s executed in simulation.....but now i have decided to implement in hardware....i have decided to do it by using fpga kit....i want to know what type of fpga kit has to be used for this robotic arm manipulator....and and what are the other parts that are needed to implement this in hardware.....is there many types of fpga kit....if so can u tell me the types....and the fpga tat can be used for this project.....
 

chipseller

Full Member level 3
Joined
Mar 9, 2011
Messages
162
Helped
90
Reputation
180
Reaction score
89
Trophy points
1,308
Location
Northamptonshire, UK
Activity points
2,134
use an Actel Proasic 3. The dev kits not too expensive , the parts are relatively cheap, need no other support components, are live at power-on and non-volatile and the development software is completely free for 98% of devices.

If you are in the UK I can help you further, otherwise you can contact your local distributor.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top