Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

very important in sigma delta using cadence

Status
Not open for further replies.
H

hoka_89

Newbie level 4
Joined
Apr 9, 2011
Messages
7
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,319
when i want to calculate the SNR of output of sigma delta i run the design on cadence for 6 sec(as i have input=100hz &sampling frequency =50Khz)
and i take it on matlab to calcsnr when i take samples very close from end the snr become 97db but when i go to the middle it become 60db so how many samples i take from the file and from where
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top