Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

VCSEL Driver/TIA Rx Ckt Help

Status
Not open for further replies.
I

infinite_gbps

Member level 3
Joined
May 11, 2009
Messages
59
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
1,804
vcsel driver

Hi Everyone,

I would like to put together a VCSEL Driver that can accept LVDS signaling. The VCSEL is a 850 nm with a bias condition of -1.6 V.

I looked at a few companies that provide this: Vitesse, GigOptix, Maxium, etc.

Since I am fairly new to all of this I would like to see if anyone can help me with teh actual application.

The supply voltages are 2.5 V but I am open to using 3.3 V.

Does anyone know of a quick schematic, reading materials, or any ideas they can offer to help with me with this. Thank you.

Feel free to ask me questions.

EDIT: Low forward current of 4mA to 8mA.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top