VCS, NC-Verilog and Modelsim, which is the best simulator??

[shelkerahul]

Re: VCS, NC-Verilog and Modelsim, which is the best simulato

I think Modelsim is the simple and good simulator.

 

[atremp]

plus Debussy's waveform probe tool, VCS is the same to NC

 

[adap]

I started with Modelsim when I learned VHDL/Verilog. I used it for small designs and I believe it's a good simulator.
For large designs I think NC-VHDL/NC-Verilog are better.

 

[gow]

Re: VCS, NC-Verilog and Modelsim, which is the best simulato

NC-Verilog i select

 

[nano]

NC-Sim is the best choise for simulation.

 

[sarath51]

Re: VCS, NC-Verilog and Modelsim, which is the best simulato

all the simulators are good and each has specific advantages and disadvantages .

 

[peen1]

Re: VCS, NC-Verilog and Modelsim, which is the best simulato

I think that NC is much better than modelsim. Modelsim is good for PC and small designs.....but it is very slow on big designs. I have run both simulators on solaris machines and NC is much better.

 

[xiaolongbao]

it is hard to say which is the best,
modelsim can be got easily,
nc must be setup at workstation,
vcs have pc version and downloaded from web

 

[yasonwang]

NC is my prefered one.

 

[googlegzh]

i use NC_verilog ,but modelsim too good for VHDL and verilog mixture

 

[BrownBear]

Re: VCS, NC-Verilog and Modelsim, which is the best simulato

ModelSim is convenient to use during project's debug.
VCS is better during RTL and gate level verification especially for big projects.

 

[davidyu]

Re: VCS, NC-Verilog and Modelsim, which is the best simulato

VCS/NCV is very fast and simple for verilog simulation, the modelsim is suit to the VHDL, and the usually VCS is at least equal to the NCV at the speed, the modlesim is much more slow for verilog

 

[wangkl]

Re: VCS, NC-Verilog and Modelsim, which is the best simulato

I perfer to VCS for rtl simulation.
If postlayout simulation, I would like to use NC-Verilog

 

[JesseKing]

i prefer nc-verilog than others.

 

[marksile]

Re: VCS, NC-Verilog and Modelsim, which is the best simulato

I use NC-verilog. It is the best simulation.

 

[zlop]

I use Modelsim to do the sim of RTL level and for the functional verification. It looks very good!

 

[ic_kuang]

Re: VCS, NC-Verilog and Modelsim, which is the best simulato

I use NC-verilog, it best. I like it.

 

[hover]

NC-verilog is more better than others

 

[heywood]

Re: VCS, NC-Verilog and Modelsim, which is the best simulato

I think :NC-Verilog for ASIC design and Modelsim is good for Xilinx

 

[FLEXcertifydll]

Re: VCS, NC-Verilog and Modelsim, which is the best simulato

I think the key value of the simulation tool is speed, coverage, precision, stabilization and cost.