Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

variable voltage output using pwm

Status
Not open for further replies.

vijay b@dboy

Newbie level 2
Joined
Sep 7, 2012
Messages
2
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,296
i want to generate variable voltage output according to pwm's dutycycle.so which ic or circuit is preferable??please suggest as soon as possible.
 

To convert a PWM output to an analog voltage use a low-pass filter.
According to your PWM frequency For example 9.76Khz you can have an R = 4.7K and C = 1.0uF. This gives a bandwidth of 30Hz.
https://www.ontrak.net/pwm.htm
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top