Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
or i think you can use a simple analog port of a PIC microcontoller...connect MIC to an adc port....take the adc values for some time...and match it with the templates stored already ......but the problem will be ...you have to talk the words exactly same as the templates...since here we use amplitude comparison...not the frequency..( you can give some range for the compared value i think)