Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

using ULPI USB transceiver

Status
Not open for further replies.
R

rhayne

Newbie level 4
Joined
Feb 6, 2012
Messages
5
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,312
Using ULPI USB transceiver

Good day.

I am trying to use a USB transceiver that uses ULPI to establish a communication to the ML507. As far as I've read, the built in cypress chip in the board is somehow faulty so I decided to use an external transceiver. As of the moment, I am stuck at initialization of the USB transceiver. It seems that I am not getting the correct setup packet. Am I doing the correct sequence for initializing the transceiver?

Thanks to those who will help.
 

Attachments

  • try_this.txt
    11.8 KB · Views: 52

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top