Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Using Touchstone file as a model in HFSS?

Status
Not open for further replies.
T

tomshong

Newbie level 1
Joined
May 14, 2010
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,286
Hi all,

Is is possible to import Touchstone .s2p file as a model and use it in another simulation in HFSS? If so can someone step me thru the process? I am using HFSS v15. The manual doesn't really tell me much on the topic.

Thanks

Tom
 

You can import .s2p as solutions but not as models as far as I know in HFSS. In Designer you can import n-port model and browse to the s parameter file to import. then you can connect it in a circuit just like any other circuit component.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top