Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Using the useful skew after CTS

Status
Not open for further replies.

devop

Full Member level 1
Joined
Dec 5, 2006
Messages
99
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
1,973
we can opt timing use useful skew after CTS,and at that time,the clock tree fixed,and the useful skew is based on the fixed clock tree timing.Am I right?
If I'm right,I am wanding when doing CTS,can I tell the SOC-encounter that I will use the skew latter,then the software will not fix some skew that will use later?
 

useful skew?

we can opt timing use useful skew after CTS,and at that time,the clock tree fixed,and the useful skew is based on the fixed clock tree timing.Am I right? or the opt after route will reopt the cts??
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top