Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

using rc snubber across 24v dc solenoid coil

Status
Not open for further replies.
R

raman00084

Full Member level 6
Full Member level 6
Joined
Nov 29, 2010
Messages
375
Helped
2
Reputation
4
Reaction score
2
Trophy points
1,298
Visit site
Activity points
4,076
can i use a rc snubber across 24v dc solenoid coil?
if so what value of r and c can i use


regards
kalyan
 

You can suppress the noise generated below diode threshold using film snubber cap and a power diode across the coil, but LC resonance and Q are Engineering values you can learn.


You need to specify power,voltage/current with coil resistance and driver for proper design question with all parts specified and mechanical load.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top