Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

using a pair of 2x2 MIMO 802.11x radios to feed 4 X 90 degree sector antennas

Status
Not open for further replies.
J

Joel-Tang

Member level 4
Member level 4
Joined
May 21, 2009
Messages
71
Helped
9
Reputation
18
Reaction score
8
Trophy points
1,288
Location
Dartmouth, NS
Visit site
Activity points
1,766
I'm seriously considering using a pair of 2x2 MIMO 802.11x radios to feed 4 X 90 degree sector antennas to achieve high gain omnidirectional coverage.
I know this isn't how MIMO is meant to be used but I think this should work. I don't expect to exceed 3 MBits/s so I don't really need the frequency reuse aspect of MIMO that would be lost. Has anyone ever done this? Is it possible?

Joel Richard
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top