Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

User defined Project material

Status
Not open for further replies.

zara12

Newbie level 2
Joined
May 16, 2011
Messages
2
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,299
Hi
I want to add material of my choice for wave propagation analysis in HFSS e.g. perfect conducting. After clicking on add material option a dialog box appears in which the following parameters are required, i.e., relative permittivity, relative permeability, bulk conductivity, dielectric loss tangent, magnetic loss tangent, magnetic saturation, Lende G-factor, Delta H. I think for perfect conducting material relative permittivity is 1, relative permeability is around 50,000, bulk conductivity is infinite, but i could not define the remaining parameters even for perfect conducting rather the material of my choice. Anyone can help. Thanking in anticipation
 

streamlet

Full Member level 3
Joined
Dec 24, 2007
Messages
187
Helped
38
Reputation
76
Reaction score
30
Trophy points
1,308
Activity points
2,407
For perfect conducting material, u do not need to define by yourself. HFSS has defined PEC already.
 

Status
Not open for further replies.
Toggle Sidebar

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top