Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

USB to RS-232 adapter schematics?

Status
Not open for further replies.

VSWR

Advanced Member level 3
Joined
Feb 7, 2002
Messages
746
Helped
103
Reputation
206
Reaction score
24
Trophy points
1,298
Activity points
5,423
Anyone having schematics of an USB to RS-232 adapter? I need it for my laptop.
 

Try this site:
hxtp://www.ftdichip.com/FTSchema.htm
hxtp://www.beyondlogic.org/porttalk/porttalk.htm
hxtp://sourceforge.net/projects/ezusb2131
hxtp://www.indiacam.net/pinout/usbfaq.html
hxtp://www.lvr.com/usb.htm

Maybe this helps
 

    V

    Points: 2
    Helpful Answer Positive Rating
Try this - it works well.
**broken link removed**
 

    V

    Points: 2
    Helpful Answer Positive Rating
Microchip as also a chip with USB and UART
build in
 

Hello everybody.
I just want to say .Don't loose
your time with just another USB
chip .I had the opportunity
of using the FTDI chip.
IT is a little wonder..
you can interface it with anything
and the soft is free .
LINUX and MICROCRAP(SOFT) drivers free!!
 

Has anyone tried the ftdi 245 (USB to FIFO) device? Is it true you can use the same software drivers as for the 232 (USB to serial) part?
 

On 2002-02-21 22:29, GaAs FET wrote:
Anyone having schematics of an USB to RS-232 adapter? I need it for my laptop.
Hi GaAs,

try the AT76C711 from ATMEL
go on http://www.atmel.com and USB products
A good dev board is avaible.
By.
 

Does exist any solution which do not need to instal any SW into PC?
Only any "black box" with cable

pool_77
 

How about PL-2303? Does anyone use this chip before? Try **broken link removed**. As I know, there is no this kind of class driver in USB spec., thus the driver installed is necessary.
 

USB and PIC:

**broken link removed**
 

Maxim has also a one chip resulution
 

I heard that on Mac those USB-RS232 converters encounter some problems. Anybody has experienced that too?
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top