Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

USB slot voltage and Current drive specification??

Status
Not open for further replies.

buts101

Full Member level 3
Joined
Apr 29, 2005
Messages
168
Helped
3
Reputation
6
Reaction score
2
Trophy points
1,298
Activity points
2,867
usb voltage specification

Can usb can drive 2 channel speakers? What are the voltage and current drive specification. I see, mp3 player are charged through usb drive.

Best regards,
Buts101
 

usb drive voltage

Hi

According to the specs a USB device can't sink more than 500mA @5V if it's connected on the main hub or self powered hub.

and if the device is connected to a buspowred hub it can sink up to 100mA@5V.

If you neeed more power you must make your USB Device self powred and not Bus powred

you can check the usb specs @
www.usb.org

or for simplicity you can check
http://www.beyondlogic.org/usbnutshell/usb1.htm

and this link may help you too
**broken link removed**

Salam
Hossam Alzomor
www.i-g.org
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top