Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

USB / RS232 switch - advice please

Status
Not open for further replies.
C

Cluricaun

Advanced Member level 2
Joined
Sep 28, 2001
Messages
627
Helped
17
Reputation
34
Reaction score
7
Trophy points
1,298
Activity points
3,315
USB/RS232 switch

Hi

In a measuring device I need to switch between either RS232 or USB(with adapter), there is a DB25 at the PCB.So what I need is a DB25->DB25 or USB, is this possible to do with a mechanical switch or is it better to use a 2x8:1 MUX? Any advice is welcome
I have seens some muxes at M@xim perhaps this is the way to go.

Thanks in advance
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top