Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

USB Interface to RS232 using 8051MCU

Status
Not open for further replies.
S

sadaqat

Newbie level 3
Joined
Oct 4, 2005
Messages
3
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,297
if any one have some suggestion on this project please mail me.
Thanx
 

If you are looking to connect the serial I/O pins of the MCU to a PC via USB, I'd recommend the FTDI232RL or SiLabs cp2102 or cp2103. The FTDI chip comes in a more friendly package. The SiLabs part is tiny... google will give you the datasheets for these parts.

These chips are incredibly easy to use.

Phil
 

good

Added after 2 minutes:

not good
 

now that's what I call a really clear and understandable post.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top