Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

USB 2.0:PHY aborted by Link, ULPI I/F Section #3.8.4.2

Status
Not open for further replies.

niravbhatt

Junior Member level 3
Joined
Mar 16, 2009
Messages
30
Helped
5
Reputation
10
Reaction score
2
Trophy points
1,288
Location
Ahmedabad,India
Activity points
1,479
usb ulpi assertion

Can anybody help me to understand that what are the possible conditions which enables LINK to abort PHY in case of ULPI interface.

More details:
According to the ULPI Rev_1.1, section 3.8.4.2, LINK aborts PHY by asserting STP. LPI PHY will see the STP asserted and abort the transaction from PHY to LINK by deasserting DIR & NXT in the next cycle of STP assertion. It is OK & fine.

But, my question is..... what could be the possible conditions which causes STP assertion from LPI wrapper?

Thanks in advance.
 

me.iitv29

Newbie level 1
Joined
Feb 11, 2008
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,285
In the last paragraph of section 3.8.4.2 it is specifically mentioned "it is primarily provided for the link to shut down a babbling port by disabling the phy."

I hope this would solve your problem.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top