Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

USB 2.0 Connector (schematic layout)

Status
Not open for further replies.

Christophe_work

Junior Member level 1
Joined
May 24, 2007
Messages
17
Helped
0
Reputation
0
Reaction score
1
Trophy points
1,281
Activity points
1,400
hi,

I'm designing a USB A 2.0 interface. The goal is to put a connector on the board. The signals are coming from a PC-motherboard, USB header.

This is about the EMI / ESD components; what has to be first / closest to the connector? The EMI components or the ESD components?

On my schematic I have put the ESD components first:



best regards
 
Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top