Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

USB 1.0 or 1.1 Specifications

Status
Not open for further replies.
B

bharatsmile2007

Full Member level 3
Joined
Sep 19, 2007
Messages
179
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,298
Activity points
2,306
Hi All,

Can any one give me USB 1.0 or 1.1 Specifications?

Thanks
 

1st hit in Google:
**broken link removed**

Anyway I'd recommend using the 2.0 specification and skip the high-speed part
 
Thanks M!K...

Do you have any idea abt the Output Driver Current Specification for USB 1.1 ?
 

The maximum currents are the same as in USB spec. 2.0:
low-power: 100mA
high-power: 500mA
Read about that in chapter 7.2.1 "Classes of Devices" and chapter 7.3.2 "Electrical Characteristics" of USB spec. 1.1
 
Thanks M!K...

Any idea abt the basic building block of USB Transmitter compliant to 1.1?

As any general purpose IO Transmitter has Pre-Driver and Driver Circuits...I mean to say USB Transmitter has any other blocks other than Pre-Driver and Driver?
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top