Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

urgent: only S11 of S-parameter simulation in ADS

Status
Not open for further replies.

mikekan

Member level 4
Joined
Apr 8, 2009
Messages
69
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,288
Activity points
1,714
hi all,

I simulate 5 patch antenna array (in one line) by Momentum, ADS 2008. I put 5 single ports to 5 antennas in order to get S-matrix simulation.
But the problem is that I just got S11 result only, the rest of S12, S22, S23, S24... did not appear.

Please help me for this problem.

Thank you.
 

In the data display you need to draw manually.
click on either graph or table and select the parameters that you need to verify.
Data Display Server will not be adjusted if number of ports are more than 2.
 

Oh, thank you. it takes quite long time for me to draw by hand.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top