Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Urgent: half band FIR filter and low pass FIR filter

Status
Not open for further replies.

cafukarfoo

Full Member level 3
Joined
Jul 25, 2007
Messages
170
Helped
8
Reputation
16
Reaction score
5
Trophy points
1,298
Activity points
2,510
Hello all,

Anyone know what is the different between half band filter and low pass FIR filter.

For the moment, i think it is the same between both in term of formula below:
y(n) = h(0)x(n) + h(1)x(n-1) + h(2)x(n-2) ...

just that half of the coefficient is zero for the half band filter.

Can some one guide me here? THanks.
 

Hi,

Half band filter is also a lowpass FIR filter. The bandwidth of the filter is half of the Nyquist rate or quarter of the sampling rate and it makes half of the filter coefficients zero. The name 'Half-Band' comes from the fact it is using only half of the available bandwidth.

I hope it has helped.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top