Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Unable to load hex file using TopWin for TOP 2005 PIC progra

Status
Not open for further replies.

peacezim

Newbie level 4
Joined
Jul 11, 2009
Messages
7
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
Germany
Activity points
1,356
topwin 2005

Hello all,
I had a strange issue while loading the hex using TopWin Ver 5.67 for TOP2005 programmer, for the hex generated in MPLAB for PIC16F73.

Please see the sample program I was trying as below

__CONFIG(WDTDIS & XT & UNPROTECT);

void main()
{
ADCON1=0x06;
PORTA=0;
TRISA=0x00;
while(1)
{
RA0=1;
}

}

And the hex generated was as below,
:040000008A11F22F40
:100FE4000630831603139F0083128501831685013F
:0C0FF40083120514FA2F83018A110028D3
:02400E00F93F78
:00000001FF


When I tried to load this hex file through TopWIn it was showing as below,
0000: 8A 11 F2 2F FF FF FF FF FF FF FF FF FF FF FF FF .../............
0010: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF ................
0020: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF ................
0030: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF ................
0040: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF ................
0050: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF ................
0060: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF ................
0070: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF ................
0080: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF ................
0090: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF ................


I could never see the complete hex file loaded in the buffer as shown.It is only partially loaded.
Can somebody help me regarding this?
 

Status
Not open for further replies.
Toggle Sidebar

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top