Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

ULN2803 to driva and Triac BT136 (AT89C2051)

Status
Not open for further replies.
S

sunil21

Advanced Member level 4
Joined
Dec 2, 2010
Messages
119
Helped
4
Reputation
8
Reaction score
5
Trophy points
1,298
Activity points
2,514
Can i give the output of AT89C2051 thru ULN2803 to drive Traic BT136 , which will be connected to a 230v bulb.

Or Optoisolator can be activated directly but MC port output?
 

Hi,

NO ! you cannot use a ULN2803 for controlling a mains triac there is no isolation, use a proper opto isolator, many circuits around.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top