Aug 29, 2014 #1 C clementyan Newbie level 1 Joined Aug 29, 2014 Messages 1 Helped 0 Reputation 0 Reaction score 0 Trophy points 1 Activity points 6 Hello : Excuse, I want to take two modules interconnected by the network, such as the following diagram. I confirm that my setting of baud rate and 8 N 1 are correct and same. How do I set the module? thanks. Last edited: Aug 29, 2014
Hello : Excuse, I want to take two modules interconnected by the network, such as the following diagram. I confirm that my setting of baud rate and 8 N 1 are correct and same. How do I set the module? thanks.
Aug 29, 2014 #2 H horace1 Advanced Member level 5 Joined Nov 18, 2008 Messages 2,118 Helped 596 Reputation 1,188 Reaction score 571 Trophy points 1,393 Location Norwich, UK Activity points 13,063 what is the serial to ethernet model you are using? depending on the device there are various ways to configure them, e.g. serial command line interface, telenet, on-device web server, etc. e.g. the Lantronix XPORT https://www.lantronix.com/device-networking/embedded-device-servers/xport-pro-lx6.html
what is the serial to ethernet model you are using? depending on the device there are various ways to configure them, e.g. serial command line interface, telenet, on-device web server, etc. e.g. the Lantronix XPORT https://www.lantronix.com/device-networking/embedded-device-servers/xport-pro-lx6.html