TWS-434A and RWS-434

Status
Not open for further replies.
H

haunsdoger

Newbie level 3
Joined
Nov 8, 2012
Messages
4
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,310
Howdy,
Can the TWS and RWS data lines (Pin-2 on both modules) be connected together (share a data line) if there is only power to ONE module at a time? I have only one data line to control both modules.
 

If I correct undestand, you try to use RX and TX modules on one node with one uC circuit for communicating with other nodes ?
 

tpetar said:
If I correct undestand, you try to use RX and TX modules on one node with one uC circuit for communicating with other nodes ?
Click to expand...

Yes, this is correct. I am using a PIC processor and using only one data in/out line (GPIO) . But documentation that
I find is very limited on the input/output circuits of these modules. Thank you for your quick response. George
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…