Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

TWO PWM Generation simultaneously on STM32F4

Status
Not open for further replies.
Jinzpaul4u

Jinzpaul4u

Full Member level 4
Joined
Feb 1, 2012
Messages
231
Helped
59
Reputation
118
Reaction score
60
Trophy points
1,328
Location
India
Activity points
2,822
Hello Everybody.

I need to output 2 PWM's simultaneously and control the duty cycles independently on STM32F407 microcontroller. I need to use two independent interrupt service routine for each pwm channels(I am measuring total pulse count has generated.). Please let me know , will it possible to use both PWM channel simultaneously and also interrupt service too?

Any kind of feedback would be apperciable.

Thanks in advance.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top